5-36V Switch Drive High-Power MOSFET Trigger Module
Original price was: ₹78.00.₹39.00Current price is: ₹39.00.
Features
- The trigger source: digital high-low (DC3.3V – 20V), can be connected microcontroller IO port, PLC interfaces, DC power, you can access the PWM signal, the signal frequency 0–20KHZ perfect support.
- Output capacity: DC 5V – 36V, at room temperature, continuous current 15A, power 400W! Lower auxiliary cooling conditions, the maximum current up to 30A.
- Applications: You can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps, solenoid valves, PWM, motor speed control, lamp brightness. etc.
Description
Product Description
The 5-36V SWITCH DRIVE HIGH-POWER MOSFET TRIGGER MODULE is of high power MOS trigger switch driver module and control board with a field-effect tube to adjust the electronic switch. It adopts imported double MOS parallel active output to show lower internal resistance, greater electric current, and power.
Besides it works at 15A, 400W under a common temperature which satisfies most devices usage and realizes the control of great power devices in a relaxed way. What’s more, it can be applied to power devices which could be controlled by output terminals like electric motors and light bulbs to control the speed of the motor and the light of bulbs.
The use of imported dual-MOS parallel active output, lower resistance, more current, strong power at room temperature, 15A, 400W, to meet the most use of the equipment. Wide voltage, the perfect support for PWM. Easily control high power devices. Input PWM to achieve motor speed control, lamp brightness control.
Package Includes
- 1 x 5-36v Switch Drive High-Power MOSFET Trigger Module
| Continuous Current (A) | 15 |
|---|---|
| No. of Channels | 1 |
| Battery Protection Mode | No |
| Operating temperature | -40 ~ +85 |
| Cooling Fan | No |
| Arduino Sheild | No- can be used with Wire connection |
| Speed Control | Yes |
| Polarity Protection | NO |
| Dimensions in mm (LxWxH) | 34 x 17 x 12 |
| Weight (gm) | 6 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 7 × 6 × 4 cm |
Additional information
| Weight | 6 g |
|---|---|
| Dimensions | 7 × 6 × 2 cm |
Andre D. –
These little MOSFETs are quite amazing, all the soldiers are clean and the wire connection system is decent.
And for those wondering how to get these working with an Arduino board, it’s quite simple. Simply write a HIGH PWM signal to one of the PWM pins on your board to activate, and LOW to deactivate. Very happy with these MOSFETs and will buy them again!
mihir –
These were a good value.