MQ-7 Gas Sensor Module for Carbon Monoxide
Original price was: ₹99.00.₹88.00Current price is: ₹88.00.
- MQ Gas Sensors compatible ARDUIN0 UN0 / ESP32 / MQTT / Raspberry PI
- MQ2 is one of the commonly used gas sensors in MQ sensor series. It is a Metal Oxide Semiconductor (MOS) type Gas Sensor also known as Chemiresistors
- Gas sensors are employed in factories and manufacturing facilities to identify gas leaks, and to detect smoke and carbon monoxide in homes
- Commonly used to detect toxic or explosive gasses and measure gas concentration
- Package INCLUDED : 1 x MQ-7 – Carbon Monoxide
Description
MQ7 Gas sensor is another one of Metal Oxide Semiconductor (MOS) type Gas Sensor of MQ Gas Sensors family involving MQ 2, MQ 4, MQ 3, MQ 8, MQ 135, etc. It is mainly used to detect Carbon Monoxide. This sensor contains a sensing element, mainly aluminum-oxide based ceramic, coated with Tin dioxide (SnO2), enclosed in a stainless-steel mesh. Whenever CO gas comes into contact with the sensing element, the resistivity of the element changes. The change is then measured to get the concentration of the gases present. The MQ7 Sensor has a small heating element present which is needed to preheat the sensor to get it in the working window. It can detect Carbon Monoxide Gas in the range of 20 PPM to 2000 PPM in the air. It finds uses in Alarm application in case of CO gas concentration build-up in the home or your car as CO is a very harmful gas and can kill a person if present over 300PPM.
SPECIFICATIONS
- Operating Voltage is +5V
- Can be used to Measure or detect CO
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V
- Stable, Long life and Low Cost
- Fast Response time
- Heater consumption about 350mW
- The Sensitivity of Digital Output pin can be varied using the potentiometer
PRODUCT DESCRIPTION
To use the Sensor Module, you have power the device with 5V supply and the Power LED will start to glow. To power it, you can use external supply or connect +5V and GND pin of Arduino. You should give it some preheating time before start reading the output. While measuring the gas present, the Output LED will glow in a specific concentration of the gas. You can change it by using the potentiometer. Else you can also use the Analog Output to see how your program reacts to different concentrations of gases present.
Additional information
| Weight | 150 g |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
Indranil Adhikary –
Received. Didn’t test it yet.
Sanchit Sachan –
It’s been quick, it comes well protected in bubble plastic and everything is perfect. A great salesman. Thank you very much kitsguru.
jaya kumar –
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
Kethan Shetty –
the order sent very quickly. Tracked all the way. Order came in 2 days. Came in the composition of the general parcel. It’s all right. recommend kitsguru