RC522 RFID Kit-13.56MHz RFID-RC522 Reader/Writer Module+Standard Blank RFID Chip+Straight Header Strip+Right-Angle Header Strip+A Special Shaped RFID Tag Keychain
Original price was: ₹102.00.₹92.00Current price is: ₹92.00.
- Highly integrated analog circuitry to demodulate and decode responses.
- Supports ISO/IEC 14443 A/MIFARE.
- Typical operating distance in reading/Write mode up to 50 mm.
- Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd.
- SPI up to 10 Mbit/s.
- FIFO buffer handles 64 bytes send and receive.
- Flexible interrupt modes.
- Power-down by software mode.
- Programmable Timer.
- CRC co-processor & Internal self-test.
Hurry! only 10 left in stock.
Description
The Package includes a RC522 Reader/Write module with a RFID card and RFID keychain. The RC522 operates on 13.56MHz enabling two way (read and write) contact less communication with a transmission rate up to 424 Kbit/s. It also supports the ISO 14443A/MIFARE standards. It is commonly used in attendance systems and security systems to provide authorization. The specifications of the module are given below.
RC522 Module Specifications:Â
- Operating Voltage: 3.3V
- Operating Current: 13-26 mA
- Operating Frequency: 13.56MHz
- Communication Interface: SPI protocol
- Reader Distance: less than 5cm
- Data Transfer Rate: 10Mbit/sec(max)
- RFID Reader /Writer with Cards Kit includes a 13.56MHz RFID-RC522 Reader/Write Module, standard blank RFID chip, Straight header strip, right-angle header strip and a special shaped RFID tag keychain. It uses SPI to communicate with microcontrollers. It supports ISO/IEC 14443 A/MIFARE.
- Flexible interrupt modes | Power-down by software mode | Programmable Timer | 2.5 V to 3.3 V power supply | CRC coprocessor | Internal self-test | Highly integrated analog circuitry
- Dimensions: LxWxH:60×39.5x5mm
- The RC522 operates on 13.56MHz enabling two way (read and write) contact-less communication with a transmission rate up to 424 Kbit/s. It is commonly used in attendance systems and security systems to provide authorization.
- Voltage:DC 3.3V (Do not use 5V supply) | Operating Current:13-26mA | Idle Current:10-13mA | Operating Frequency:13.56MHz | Operating Temperature Range:-20 to 80 °C | Max. operating distance in reading/Write mode:50mm | SPI data rate (Mbit/s):10 | Peak Current:< 30mA | Sleep Current:< 80 μA | Storage temperature:-40 to 85 °C | Transfer speed communication:848kBd
Additional information
| Weight | 250 g |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
vedha –
Works great. I found the range is little low but …
Works great. I found the range is little low but will try few more things. Make sure you solder the pins before using it.
vinod –
Worth For Money
rajesh kumar –
Four Stars
Good product ,works well
parveen –
Perfect!
Works perfectly and in accordance to specifications, great!
kuldeep –
Good
Good product for experiments. Took some time for doing correct wiring, but worked. It would be better if it could read from greater distance of 2~10cms, it works only when almost touch or gap of less than 1cm is maintained.
ruchika –
Awesome for Arduino
Working as intended…..Very nice product
murari –
Go for it.
Amazing product. Works perfectly.
raja kumar –
Good product, no issues found